The Prowarm Protouch V2 thermostat can be used to control your electric floor heating system or water heating system. It will keep your home at a comfortable temperature whilst minimising energy use.

Available in stylish and contemporary white or Black design with a sensitive touch screen, making for simple use. The display has a modern white back light and offers both a holiday mode and manual override, plus up to four set points each day.

All thermostats come with a lifetime warranty.

• Can Switch up to 16 amps
• Auto Mode
• Hold Mode
• Holiday Mode
• Frost Mode
• Open Window Detection
• Adaptive/Learning Function

This ProTouch E Wifi is designed to be flush mounted and requires a back box of 35mm (minimum depth) to be sunk into the wall prior to installation.

1. 1. Remove the screw from the bottom face of the thermostat then carefully separate the front half from the back plate.
2. 2. Place the thermostat front somewhere safe. Terminate the thermostat as shown in the above diagram.
3. 3. Screw the thermostat back plate securely into the back box.
4. 4. Clip the front of the thermostat onto the back plate, securing it in place with the retaining screw.

Important Do not install near to a direct heat source as this will affect functionality.

Important Do not push hard on the LCD screen as this may cause irreparable damage.